The ATOS Triple Scan uses a specially developed measuring and projection technology from GOM.
Using this brand new technology the ATOS Triple Scan produces a high accuracy and improved measurement of shiny surface, complete data on complex components with deep pockets or fine edges such as turbine blades, reducing the number of individual scans and resulting in a simple handling.
The ATOS Triple Scan is also equipped with blue light technology. The narrowband blue light enables precise measurements to be carried out independently of environmental lighting conditions.
ATOS uses high resolution measuring cameras with up to 16 megapixel resolution and specially developed optics for precise measurement.
The accuracy, measurement resolution and measuring area are completely adaptable to the application requirements. This allows for the highest resolution for highly detailed, small parts with measuring volumes down to 38mm, or for extremely fast digitizing of large objects with measuring volumes up to 2m.
This flexibility allows measurement of a large part spectrum with the same sensor head, and when used in combination with TRITOP, the ATOS System is capable of scanning parts of over 30m with a high local resolution.
The ATOS 3D Digitizer is an accurate and cost-effective solution in a number of different application areas including:
ATOS 3D Digitizers have been produced and constantly developed since 1995 and with more than 2500 installations in measurement and analysis rooms as well as factory and production halls worldwide, the ATOS has been for a long time an accepted measurement method beside the mechanical measurement machines.
The ATOS sensor combines high data quality in short measurement time with flexibility and stability for industrial environments.
The ATOS 3D Digitizer is established in industrial process chains. The integration of ATOS in industrial development and production processes helps:
The GOM Touch Probe combines full-field and touch probe 3D measurement. The GOM Touch Probe allows quick measurement in difficult to access areas, comparison directly to CAD, measurement of primitives, quick measurement of individual points and online alignment.
ATOS and Touch Probe measurements are carried out with one system and are evaluated with one software package. No extra hardware or tracker is required, enabling quick measurement procedures and easy interchange between surface and single point measurement and analysis.
Read more about the GOM Touch Probe.
The Plus Box add-on for all ATOS Triple Scan sensors enables fully integrated photogrammetry and reference point collection.
With ATOS Plus a completely automated inspection process can be realized allowing:
The ATOS Plus solution is fully integrated into GOM's established digitizing and inspection solutions. The Plus Box allows high accuracy, automated photogrammetry and extends existing ATOS Triple Scan sensor heads.
The ATOS Plus features a high resolution photogrammetry camera with up to 29 megapixel resolution and specially developed optics allowing large measurement areas and short working distances. The built-in faceted illumination provides uniform lighting regardless of measurement area or environmental conditions. All ATOS Plus sensors are verified and certified according to VDI acceptance tests.
GOM completely develops it's hardware and software in house. The powerful, process safe, traceable ATOS Professional and GOM Inspect Professional software controls the sensor head, processes the 3D point cloud and can edit and completely post-process the data. Through a simple graphical user interface, the ATOS Professional and GOM Inspect Professional software supports today's tasks in quality control, manufacturing processes and reverse engineering. Learn more about ATOS Professional and GOM Inspect Professional in the Software pages.
|Camera Pixels||2 x 5 000 000||2 x 8 000 000||2 x 16 000 000|
|Measuring Area||38 x 29 -
2000 x 1500 mm²
|38 x 29 -
2000 x 1500 mm²
|170 x 130 -
810 x 610 mm²
|Point Spacing||0.02 - 0.79 mm||0.01 - 0.61 mm||0.03 - 0.16 mm|
|Working Distance||490 - 2000 mm||490 - 2000 mm||440 - 800 mm|
|Cable Length||up to 30m|
|Sensor Positioning||industrial sensor stand, automatic per Robot|
|Part Positioning||manual or automatic rotation table|
|Image Processing Computer||portable or High-End PC|
|Operating System||Windows 7|
|Software||data capture, processing and complete inspection|
|Material part finish||measurement of shiny and dark surfaces
complex component geometries
|Ambient lighting||low sensitivity to environment lighting conditions|
|Environmental vibrations||unaffected due to GOMs dynamic referencing system|
|Operating Temperature||5 - 40°C, non condensing|
|Power Supply||90 - 230 V AC|
Find out more about the practical use of the ATOS 3D Scanner and view all ATOS application notes.